Flexible braided copper connector with welded lugs — absorbs vibration and keeps grounding continuous.
Product imagery: factory photo plus studio renders. The exact geometry, layers and terminals of your part follow your drawing.
Final values follow your drawing — this is the standard configuration of the family.
| Parameter | Value |
|---|---|
| Braid | Tinned or bare electrolytic copper |
| Ends | Welded solid lugs, drilled per drawing |
| Standard series | SC-BD: ~190 A / SC-BE: ~340 A (reference) |
| Circular mils | 96,000 / 168,000 (reference series) |
| Solder | Lead-free, RoHS compliant |
| Forms | Round or flat braid, single or multiple |
| Note | Not recommended for continuous DC current carrying |
| SKU | SY-CM-306 |
Key characteristics of this product family.
Generators, turbines and transformers vibrate, and that movement slowly loosens rigid bolted power connections. A braided copper connector sits between the vibrating equipment and the distribution network, flexing with the motion while holding a continuous low-resistance path to the bus or ground. Ends are welded with lead-free solder for RoHS compliance and long pull strength.
Where this busbar configuration earns its place.
Where this busbar configuration earns its place.
Where this busbar configuration earns its place.
Where this busbar configuration earns its place.
Where this busbar configuration earns its place.
Where this busbar configuration earns its place.
Your drawings reach the engineers who build the part.
Design risks flagged when changes are cheap.
Test records per lot, CoC and PPAP on request.
Drawing to delivered production parts, one supplier.
From spec review to shipped, tested parts — one accountable supplier.
Straight answers from the engineering team.
Every SHANYUAN busbar is custom, but the power circuits they connect recur across markets. Three typical ones — send us yours and we will point to the right stack-up.
Tight, low-inductance links between the battery source and traction inverters, fully edge-sealed for 400–800 V platforms.
ExploreCommutation-loop connections from DC-link capacitors to IGBT bridges, designed against switching overshoot V = L × di/dt.
ExploreConverter DC links built for rising bus voltages toward 1500 VDC, with creepage and partial-discharge margins included.
ExploreLayers, terminals, dielectrics and mounting are all configurable. Send us your spec for DFM review and a quotation within one business day.
Send drawings, current ratings and voltage class — DFM feedback and a quotation within one business day.
