Laminated busbar quality is determined long before the first electrical test — it is built into the layup, the lamination window and the terminal welding.
| Material | Standard options |
|---|---|
| Conductors | C11000 copper as standard; aluminum available on request |
| Dielectrics | PET, Nomex and epoxy (DLF) films, selected by voltage class and operating temperature |
| Plating | Tin finish for corrosion protection and joint solderability |
Per customer specification and applicable standard.
Measured on sampled parts per lot.
Terminal positions, hole sizes and envelope vs drawing.
Plating coverage, edge sealing and weld quality.
Electrical verification of each conductor path.
I registri dimensionali ed elettrici sono mantenuti per lotto di produzione e possono essere forniti con la spedizione su richiesta.
Prima di tagliare qualsiasi attrezzaggio, i nostri ingegneri eseguono una revisione DFM del vostro disegno: strati, percorsi di corrente, spaziatura terminali, distanze di bordo e giochi dielettrici. Individuare una distanza di bordo critica o una zona di saldatura sottodimensionata in questa fase costa molto meno che scoprirla in produzione.
Stack-up validated against voltage class and current.
Cross-sections checked against continuous and peak current.
Pitch and weld zones matched to mating hardware.
Creepage and dielectric clearances verified before tooling.
Our in-house QC process — hipot, insulation resistance, dimensional, visual and continuity checks on every lot — is the internal half of quality. The external half is the standards landscape our customers design to, and it is worth being explicit about which standards apply to power-interconnect parts and how they show up in the drawings we build to.
Component assemblies used in power distribution, including high-current connectors.
Sits alongside UL 1977 on recognized connectorized power-distribution assemblies.
Routine expectation for insulator housings and dielectric systems on shipped parts.
Baseline on shipped product; halogen-free constructions available where the spec calls for it.
Application-level standards: SAE J1772 · EV charging couplersOpen-rack platform specs · in-rack busbar interfaces — these set the current-interruption, arcing and cycle-life tests the interconnect must pass.
We do not hold aerospace or defense qualifications ourselves — and we do not claim to — but customers in those programs routinely flow down their own standards and special-process requirements to the parts we build.
Two technical references explain the physics behind the tests we run:
La qualità è costruita nell'impilamento, nella finestra di laminazione e nella saldatura dei terminali, poi verificata e registrata.
Costruzione, scelta dielettrica e basi di capacità.
Leggi la guida di progettazioneDimensional and electrical test records per lot — CoC and PPAP-style documentation aligned at quotation.
Risposte dirette dal team di ingegneria.
Tell us at quotation stage — we align CoCs, PPAP-style documentation and test records with your quality system.
