このファミリーの8モデル – すべて完全カスタム。
| Capability | Range |
|---|---|
| Conductor layers | 1–6+ (custom stack-ups) |
| Conductor material | C11000 copper (standard), aluminum on request |
| Plating | Tin (standard) |
| Dielectrics | PET, Nomex, epoxy (DLF) |
| Terminal types | M6/M8 threaded studs, blade tabs, screw terminals, welded tabs, fused links |
| Current rating | Per design, up to ~1000 A |
| Mounting | Integrated brackets, standoffs, edge seals |
| Material | Standard options |
|---|---|
| Conductors | C11000 copper as standard; aluminum available on request |
| Dielectrics | PET, Nomex and epoxy (DLF) films, selected by voltage class and operating temperature |
| Plating | Tin finish for corrosion protection and joint solderability |
Battery busbars connect cells, modules and racks where continuous DC current, bolted serviceability and vibration tolerance decide reliability. Three markets we build for:
Rack and string interconnects sized for continuous DC current, with bolted studs for maintenance-friendly disconnect.
High-voltage DC distribution inside fast chargers, replacing cable bundles with one insulated, low-loss laminated assembly.
Vibration-proof battery and auxiliary-supply interconnects for traction vehicles, derated for long unattended service life.
Two to four tinned C11000 copper layers with PET or Nomex dielectric, edge-sealed for 400 V class battery service, and M6/M8 stud terminals arranged to your module layout. High-density packs move toward thinner conductors and bend-free geometry.
Battery interconnects carry long-duration DC, not short pulses: size the cross-section against continuous current and ambient temperature, then check temperature rise. Bolted stud joints are torqued to your mating hardware. Start from the copper ampacity chart.
Rack and module links are designed for bolted disconnect so maintenance can remove a module without disturbing the rest of the pack. BMS sense taps and fused links sit in the same insulated laminate — see EV battery pack busbars for reference layouts.
仕様レビューから出荷・試験済み部品まで – 一貫して責任を持つ供給元。
ロットごとのハイポット、絶縁、寸法、外観、導通検査 – 要求に応じて出荷に添付される寸法・電気試験記録付き。
エンジニアリングチームによる明確な回答。
Send the current profile and terminal types — we will recommend a configuration from this family or quote a custom part.
